Attaching The Steelcraft Baby Capsule To The Stroller Frame - Britax STEELCRAFT STRIDER SIGNATURE Manual

BABY CAPSULE
ATTACHING THE STEELCRAFT BABY CAPSULE
PLEASE NOTE: THESE INSTRUCTIONS ARE FOR INSTALLING AND REMOVING
THE BABY CAPSULE ON THE STROLLER ONLY. FOR INSTALLING AND PROPER
USE OF THE BABY CAPSULE IN THE CAR, PLEASE FOLLOW THE INSTRUCTIONS
MANUAL PROVIDED WITH THE BABY CAPSULE.
ENSURE THE BABY IS SECURED IN THE BABY CAPSULE WITH THE HARNESS
AT ALL TIMES. REFER TO THE BABY CAPSULE INSTRUCTION MANUAL
REGARDING PLACING AND SECURING YOUR BABY IN THE BABY CAPSULE.
A
A The Baby Capsule
must face the stroller
handle. With the
Baby Capsule handle
in the upright position,
align the Baby
Capsule directly over
the frame sockets.
Push down the
Baby Capsule until
connectors have
locked into frame
sockets.
CAUTION
B
B Squeeze in and hold
the latch on either
side of Baby Capsule
handle, rotate the
handle backward.
The GREEN indicator
will now turn to RED.
www.britax.com.au
C
C Push the Baby Capsule
handle all the way down
until you hear it lock
into the frame sockets,
the handle indicator
should now be
GREEN and the Baby
Capsule should be
locked into the frame.
If the handle indicator
is RED, the Baby
Capsule handle is
not in locked position,
repeat steps.
Please ensure It is
locked.
43