Assembly; Stroller Frame; Front Wheel; Rear Wheels - Britax B-LIVELY User Manual

Assembly

Stroller Frame

1. Push the release on the chassis lock
and open the frame.
2. Lift handle until frame locks into upright
position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.

Front Wheel

Installing the Front Wheel
1. Slide the front wheel assembly onto
the mounting post at the front of the
stroller.
IMPORTANT: Ensure the swivel lock
is at the top of the assembly when
installing.
2. Pull wheel to ensure that it is secure.
6
Removing the Front Wheel
1. Press the release buttons at the bottom
of the mounting post and pull the wheel
away from the stroller.

Rear Wheels

Installing the Real Wheels
1. Slide the rear wheel axle into the rear
wheel hub mounting bracket until it
locks into place.
2. Pull wheel to ensure that it is secure.
CLICK
Removing the Rear Wheels
1. Pull and hold the release lever at the
bottom of the rear wheel hub while
pulling the rear wheel away from
the stroller.
CLICK
7