Britax STEELCRAFT STRIDER SIGNATURE Manual page 28

STROLLER OPERATION
ADJUSTING THE HARNESS
A
A
Tighten or loosen the shoulder
straps and crotch strap by sliding
the 3 bar harness adjuster up or
down. The crotch strap should be
adjusted to a snug fit.
CAUTION:
SEWN TAB ON SHOULDER HARNESS.
OPENING THE HARNESS
28
DO NOT SLIDE 3 BAR SLIDER OVER THE
A
www.britax.com.au
B
B
Tighten or loosen the waist straps,
hold and lift the 4 bar harness
adjuster and pull the harness strap
to adjust to the desired fit. The waist
strap needs to fit firmly around the
child.
A
Release the harness by pressing the
centre button in on the crotch buckle
while pulling the waist tongues out of
the crotch buckle.