Assembly; Stroller Frame; Front Wheels - Britax B-LIVELY Double User Manual

Assembly

Stroller Frame

1. Push the release on the chassis lock
and open the frame.
2. Lift handle until frame locks into upright
position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.

Front Wheels

Installing the Front Wheels
1. Slide the front wheel assemblies onto
the mounting posts at the front of the
stroller.
IMPORTANT: Ensure the arrow on the
front wheel assembly is pointing up.
2. Pull each wheel to ensure that it is
secure.
6
Removing the Front Wheels
1. Press the release buttons at the bottom
of the wheel assembly and pull away
from the stroller.
Rear Wheels
Installing the Real Wheels
1. Slide the rear wheel axle into the rear
wheel hub mounting bracket until it
locks into place.
2. Pull wheel to ensure that it is secure.
CLICK
Removing the Rear Wheels
1. Pull and hold the release lever at the
bottom of the rear wheel hub while
pulling the rear wheel away from the
stroller.
CLICK
7