Folding The Stroller - Britax STEELCRAFT STRIDER SIGNATURE Manual

STROLLER OPERATION

FOLDING THE STROLLER

PLEASE REFER TO PAGE 6 FOR SMART LIFTING TECHNIQUES.
IMPORTANT NOTE:
• REMOVE THE CHILD FROM THE STROLLER BEFORE COMMENCING ANY
FOLDING OPERATION.
• FOLD THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE
YOUR HANDS.
• WHEN FOLDING THE STROLLER, BE AWARE OF THE DANGER OF BEING
INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE
PROCESS. KEEP ALL HANDS AND LIMBS CLEAR OF THESE PARTS.
• THERE IS POTENTIAL FOR FINGERS OR PARTS OF THE BODY TO BE INJURED
WHEN THE STROLLER IS BEING FOLDED, DUE CARE SHOULD BE EXERCISED.
• KEEP CHILDREN CLEAR OF THE STROLLER DURING FOLDING THE
STROLLER.
PLEASE NOTE: The stroller seat and wheels can be removed to reduce the
total folded size.
With the stroller seat attached, folding the leg support will also help to
reduce the folded size.
FOLDING TIPS:
1. For easier handling. It is recommended to remove the stroller seat from
the frame (Refer to Page 31) before folding. Then fold the frame and put
both the seat and frame in the car.
2. For smaller cars it may be convenient to simply remove the rear wheels.
IMPORTANT NOTE:
• Remove the bassinet or Baby Capsule if connected to the frame prior to
folding.
• The Second Seat can either be removed or folded up prior to folding.
• The rain cover must also be removed if fitted.
www.britax.com.au
33