Britax STEELCRAFT STRIDER SIGNATURE Manual page 27

STROLLER OPERATION
SECURING YOUR CHILD HARNESS
WARNINGS:
• ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS.
• THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD.
• NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE
STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A
STRANGULATION HAZARD.
• WHEN HARNESS IS NOT IN USE, DISCONNECT SHOULDER STRAPS FROM THE
WAIST STRAPS AND BUCKLE TO PREVENT STRANGULATION.
• A five point harness is provided to restrain your child.
• Buckle tongues separate for added safety.
• To reconnect buckle tongues and to secure the child in the harness please
follow the steps below carefully.
PLEASE NOTE: Each waist buckle tongue has a raised rib on one side and can
only be locked into the buckle assembly with the raised rib facing up. Ensure the
harness straps are not twisted as they may become uncomfortable for the child.
A
A
Always apply the brakes before
placing child in stroller seat.
Position the shoulder strap near the
child's shoulder and position crotch
strap between legs.
Thread the waist strap buckle
tongues through the shoulder straps
tongue guides.
USE THE HARNESS AT ALL TIMES.
Rib
B
www.britax.com.au
B
Hold the centre button in on the
crotch buckle and insert the waist
buckle tongues into the crotch
strap buckle until you hear a
'click'.
Repeat the procedure on the
other side.
Please ensure it is locked.
27