Attaching The Wheel Guards; Attaching Or Removing The Rear Wheels - Britax STEELCRAFT STRIDER SIGNATURE Manual

STROLLER ASSEMBLY

ATTACHING THE WHEEL GUARDS

A

ATTACHING OR REMOVING THE REAR WHEELS

A
A
Hold in the rear wheel release
button in the centre of the wheel
and slide the mounting pin into the
housing on the rear axle.
Please ensure It is locked.
14
A
Slide each guard onto the mounting
bracket above each rear wheel
housing and push down until it locks
into place.
There is left and right wheel guard.
Please ensure it is locked.
B
B
To remove the rear wheels, press
and hold the release button in the
centre of the wheel and pull away
from the wheel housing.
www.britax.com.au