Installing The Rear Wheels; Attaching The Toddler Seat; Installing The Canopy - Britax Brook User Manual

Installing the Rear Wheels

1. Place the stroller upside down.
2. Align the rear wheel assembly
to the stroller frame.
a. Make sure the pin holes are
aligned with the pins on the
stroller frame.
b. Slide the rear wheel
assembly to the bottom of
the stroller frame.
3. Pull on the wheel assembly to
ensure that it is secure.

Attaching the Toddler Seat

Press both brake pedals down
1.
to lock the parking brake.
8
2b
2a
3
1
2. Align seat receivers with
stroller adapters and push
onto frame until a click is
heard on each side.
NOTE: Seat attaches
forward or parent facing/
rear-facing.
3. Pull up on both sides of
the seat to ensure that
it is locked into place
correctly.

Installing the Canopy

Position the seat upright.
1.
2. Slide the canopy stays into
the canopy brackets until they
lock into place.
2
Seat
Receiver
Stroller
Adapter
3
2
9