Ptfe Rod Antenna Ansi Hole Pattern Flanges; Ptfe Rod Antenna Dn Hole Pattern Flanges - Siemens sitrans LR200 Instruction Manual

PTFE Rod Antenna ANSI Hole Pattern Flanges

process temperature (°C)
2"
4"

PTFE Rod Antenna DN Hole Pattern Flanges

50 mm
100 mm
WARNING: Never attempt to loosen, remove, or disassemble process
connection or instrument housing while vessel contents are under
pressure.
1)
UHMW-PE antennas are rated to a maximum of 80°C (176°F) of continuous duty, however, they
can be used for periods of up to 3 hours at temperatures up to 120°C (248°F) at 1 bar pressure.
2)
Customer to provide adequate bolting to retain vessel pressure and provide sufficient sealing.
Page 112 SITRANS LR200 (PROFIBUS PA)– INSTRUCTION MANUAL
3"
6"
process temperature (°C)
80 mm
150 mm
1), 2)
Process Configuration:
• 51003 with flange series 22452.
• Flange will be stamped 22452.
Process connection tag will
have the series identified as
51003.
• Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
www.siemens.com/
processautomation, on the
LR200 product page, under
Process Connection
Specifications.
1), 2)
Process Configuration:
• 51003 with flange series 22452.
• Flange will be stamped 22452.
Process connection tag will
have the series identified as
51003.
• Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
www.siemens.com/
processautomation, on the
LR200 product page, under
Process Connection
Specifications.
7ML19985JR01