Disposal; Replacing The Antenna - Siemens SITRANS LR200 Compact Operating Instructions

Radar transmitters

Hide thumbs Also See for SITRANS LR200:

Table of Contents

6.4

Disposal

6.5

● When a new antenna is installed the propagation factor will not change.

● After replacing the antenna, check the material level reported by the device against the

actual material level, and if necessary use parameter "Sensor offset" to compensate.

SITRANS LR200

Compact Operating Instructions, 05/2019, A5E46957579-AD

Devices described in this manual should be recycled. They may not be

disposed of in the municipal waste disposal services according to the

Directive 2012/19/EC on waste electronic and electrical equipment

(WEEE).

Devices can be returned to the supplier within the EC, or to a locally ap-

proved disposal service for eco-friendly recycling. Observe the specific

regulations valid in your country.

Further information about devices containing batteries can be found at:

Information about battery/product return (WEEE)

(https://support.industry.siemens.com/cs/document/109479891/)

Table of Contents