Programming Sitrans Lr200 - Siemens sitrans LR200 Instruction Manual

Key functions in Measurement mode
Key Function
Updates internal
enclosure tempera-
ture reading.
Updates echo confi-
dence value.
Updates distance mea-
surement.
Mode opens
PROGRAM mode.
RIGHT Arrow
opens PROGRAM
mode.
UP or DOWN Arrow
toggles between linear
units and percent.

Programming SITRANS LR200

Notes:
• While the device is in PROGRAM mode the output remains active and continues to
respond to changes in the device.
• Do not use the handheld programmer at the same time as SIMATIC PDM or erratic
operation may result.
• SITRANS LR200 automatically returns to Measurement mode after a period of
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on
the menu level).
Change parameter settings and set operating conditions to suit your specific application.
Operating via SIMATIC PDM
• See
Page 20 SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL
New value is displayed in LCD secondary region.
New value is displayed in LCD secondary region.
New value is displayed in LCD secondary region.
Opens the menu level last displayed in this power cycle,
unless power has been cycled since exiting PROGRAM
mode or more than 10 minutes have elapsed since PRO-
GRAM mode was used.
Then top level menu will be displayed.
Opens the top level menu.
LCD displays measured value in either linear units or per-
cent.
on page 28 for remote operation.
Result
7ML19985JR01