H3C WX Series Command Reference Manual page 9

Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Interface: Vlan3
Track Object
Table 2 Command output (standard protocol mode)
Field
Run Mode
Run Method
Total number of virtual routers
Interface
VRID
Adver. Timer
Admin Status
State
Config Pri
Running Pri
Preempt Mode
Delay Time
Auth Type
: 150
: Yes
: Simple
: 1.1.1.1
: 0000-5e00-0101
: 1.1.1.2
: 1
Description
Current VRRP working mode:
•
Standard—Standard protocol mode.
•
Load Balance—Load balancing mode.
Current VRRP running mode:
•
Real MAC—Real MAC mode, which means the virtual IP address of
the VRRP group is mapped to the real MAC address of the interface.
•
Virtual MAC—Virtual MAC mode, which means the virtual IP address
of the VRRP group is mapped to the virtual MAC address.
Number of VRRP groups.
Interface to which the VRRP group belongs.
ID of the VRRP group.
VRRP advertisement interval, in seconds.
Administrative state:
•
UP
•
DOWN
Status of the router in the VRRP group:
•
Master
•
Backup
•
Initialize
Configured priority of the router, or in other words, the priority value
specified by using the vrrp vrid priority command.
Running priority of the router, or in other words, the current priority of the
router. With VRRP tracking configured, when the state of the monitored
interface or track entry changes, the priority of the router changes.
Preemptive mode:
•
Yes—The router in the VRRP group operates in preemptive mode.
•
No—The router in the VRRP group operates in non preemptive mode.
Preemption delay, in seconds.
Authentication type:
•
None—No authentication.
•
Simple—Simple text authentication.
•
MD5—MD5 authentication.
3
Running Pri : 140
Delay Time : 5
Key : hello
State : Down
State : Positive
Pri Reduced : 10
Pri Reduced : 50