H3C WX Series Command Reference Manual page 8

Examples
# When VRRP is operating in standard protocol mode, display brief information about all VRRP groups
on the router.
<Sysname> display vrrp
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface
---------------------------------------------------------------------
Vlan2
Table 1 Command output (standard protocol mode)
Field
Run Mode
Run Method
Total number of virtual routers
Interface
VRID
Run Pri
Adver. Timer
Auth Type
Virtual IP
# When VRRP is operating in standard protocol mode, display detailed information about all VRRP
groups on the router.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
: Standard
: Virtual MAC
VRID State
1 Master
Description
Current VRRP working mode:
•
Standard—Standard protocol mode.
•
Load Balance—Load balancing mode.
Current VRRP running mode:
•
Real MAC—Real MAC mode, which means the virtual IP address of
the VRRP group is mapped to the real MAC address of the interface.
•
Virtual MAC—Virtual MAC mode, which means the virtual IP address
of the VRRP group is mapped to the virtual MAC address.
Number of VRRP groups.
Interface to which the VRRP group belongs.
VRRP group number.
Running priority of the router, or in other words, the current priority of the
router. With VRRP tracking configured, when the state of the monitored
interface or track entry changes, the priority of the router changes.
VRRP advertisement interval, in seconds.
Authentication type:
•
None—No authentication.
•
Simple—Simple text authentication.
•
MD5—MD5 authentication.
Virtual IP address of the VRRP group.
: Standard
: Virtual MAC
: 1
: Up
2
Run Adver Auth
Pri Timer Type
140 1 Simple
Adver Timer : 1
State : Master
Virtual
IP
1.1.1.1