H3C WX Series Command Reference Manual page 10

Access controllers
Hide thumbs Also See for WX Series:
Table of Contents

Advertisement

Field
Key
Virtual IP
Virtual MAC
Master IP
VRRP Track Information
Track Interface
Track Object
State
Pri Reduced
Switchover
# When VRRP is operating in load balance mode, display brief information about all VRRP groups on the
router.
<Sysname> display vrrp
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface
----------------------------------------------------------------------
Vlan2
-----
Description
Authentication key.
Virtual IP address of the VRRP group.
Virtual MAC address that corresponds to the virtual IP address of the
VRRP group. It is displayed only when the router is the master.
Primary IP address of the interface where the router in master state
resides.
Information about the tracked interface or object. It is displayed only
when the vrrp vrid track or vrrp vrid track interface command is
executed.
The interface to be tracked. It is displayed only when the vrrp vrid track
interface command is executed.
The track entry to be tracked. It is displayed only when the vrrp vrid track
command is executed.
State of the tracked interface or track entry.
State of a tracked interface:
Up
Down
Removed
State of a track entry:
Invalid
Negative
Positive
Not existing
The priority value that is reduced when the monitored interface is down
or removed, or when the status of the monitored track entry turns to
negative. It is displayed only when the vrrp vrid track interface command
or the vrrp vrid track command is executed.
Switchover mode. When the status of the monitored track entry turns to
negative, the backup immediately switches to the master.
: Load Balance
: Virtual MAC
VRID
State
1
Master
VF 1
Active
4
Run
Address
Pri
140
1.1.1.1
255
000f-e2ff-0011
Active
Local
Local

Advertisement

Table of Contents
loading

Table of Contents