H3C WX Series Command Reference Manual page 37

After a track entry is created, you cannot change its settings except the delay time. To change the delay
time, use the track nqa delay command. To modify other settings of this track entry, first delete the entire
track entry, and then create a new track entry.
Related commands: display track; nqa and reaction (Network Management and Monitoring Command
Reference).
Examples
# Create track entry 1 and associate it with reaction entry 3 of the NQA test group (admin-test).
<Sysname> system-view
[Sysname] track 1 nqa entry admin test reaction 3
31