H3C WX Series Command Reference Manual page 28

properly specified value and becomes lower than the lower limit of failure, which means the weight of the
VF owner decreases by more than 245.
NOTE:
For more information about track entries, see
Related commands: display vrrp.
Examples
# Configure to monitor track entry 1, making the weights of VFs belonging to VRRP group 1 on
VLAN-interface 2 decrease by 50 when track entry 1 turns to negative.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.1.1.1
[Sysname-Vlan-interface2] vrrp vrid 1 weight track 1 reduced 50
High Availability Configuration Guide
22
.