H3C WX Series Command Reference Manual page 3

Preface
The H3C WX documentation set includes 10 command references, which describe the commands and
command syntax options available for the H3C WX Series Access Controllers.
The High Availability Command Reference describes VRRP, track, and stateful failover configuration
commands.
NOTE:
Support of the H3C WX series access controllers for commands may vary by device model. For the
command matrixes, see
This preface includes:
Audience
•
Conventions
•
About the H3C WX documentation set
•
Obtaining documentation
•
• Technical support
Documentation feedback
•
Audience
This documentation is intended for:
Network planners
•
• Field technical support and servicing engineers
Network administrators working with the WX series
•
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
About the WX Series Access Controllers Command References
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
.