Display Dhbk Status - H3C WX Series Command Reference Manual

Parameters
vlan-id: ID of the backup VLAN, in the range of 1 to 4094.
Description
Use dhbk vlan to specify a VLAN as a backup VLAN.
Use undo dhbk vlan to restore the default.
By default, no backup VLAN is configured on the device.
Examples
# Specify VLAN 100 as a backup VLAN.
<Sysname> system-view
[Sysname] dhbk vlan 100

display dhbk status

Syntax
display dhbk status [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhbk status to display the stateful failover status information.
Examples
# Display the stateful failover status information.
<Sysname> display dhbk status
DHBK State: Enable
Backup Type: Symmetric path
Current state: Independence
VLAN ID: 11
Table 7 Command output
Field
DHBK module
Description
Service backup status of stateful failover, enabled or disabled.
24