H3C WX Series Command Reference Manual page 13

Field
Config Pri
Running Pri
Preempt Mode
Delay Time
Auth Type
Key
Virtual IP
Member IP List
VRRP Track Information
Track Interface
Track Object
State
Pri Reduced
Switchover
Description
Configured priority of the router, that is, the priority value specified by
using the vrrp vrid priority command.
Running priority of the router, that is, the current priority of the router.
With VRRP tracking configured, if the state of the monitored interface or
track entry changes, the priority of the router changes.
Preemptive mode:
•
Yes—The router in the VRRP group operates in preemptive mode.
•
No—The router in the VRRP group operates in non preemptive mode.
Preemption delay, in seconds.
Authentication type:
•
None—No authentication.
•
Simple—Simple text authentication.
•
MD5—MD5 authentication.
Authentication key.
Virtual IP address of the VRRP group.
List of IP addresses of members in the VRRP group. This address list is
displayed only when the VRRP group is operating in load balancing
mode.
•
Local—IP address of the local device.
•
Master—IP address of the master.
•
Backup—IP address of the backup.
Information of the tracked interface or track entry.
The interface to be tracked. It is displayed only when the vrrp vrid track
interface command is executed.
The object to be tracked. It is displayed only when the vrrp vrid track
command is executed.
State of the tracked interface or track entry.
State of a tracked interface:
•
Up
•
Down
•
Removed
State of a track entry:
•
Invalid
•
Negative
•
Positive
•
Not existing
The priority value that is reduced when the monitored interface is down
or removed, or when the status of the monitored track entry turns to
negative. It is displayed only when the vrrp vrid track interface command
or the vrrp vrid track command is executed.
Switchover mode. When the status of the monitored track entry turns to
negative, the backup immediately switches to the master.
7