Advertisement
Install wood strip in the hole using No.502 glue or hot
glue sticks. Notice must let pull rod through the hole
on wood strip.
Install hinge into the hole on vertical tail using foam
glue. Don't forget block the hinge with cover and
apply glue to reinforce.
Glue the servo's wire on wing using hot glue sticks.
Same way to install the middle fuselage's servo.
Also need install 2 pcs wood strips using No.502 or
hot glue sticks. Notice must let pull rod through the
hole on wood strip.
Connect servo, ESC with receiver. Glue hook and
loop tape on fuselage using foam glue. Then put
receiver on tape.
8
Advertisement
