Scraper Bars; Cleaning The Machine - Wacker Neuson RS 800A Operator's Manual

Maintenance

5.10 Scraper Bars

See Graphic: wc_gr003476

5.11 Cleaning the Machine

wpm_tx001254gb.fm
Check the two scraper bars (a) for wear. Scraper bars are made of
synthetic materials which can wear very quickly when used with
abrasive materials. Replace scraper bars as needed.
Cleaning the scraper bars:
The scraper bars should be cleaned daily after use or as often as
needed to remove built-up dirt, mud, and tar.
Use a high-pressure water jet and a strong brush if needed.
When pressure washing the machine, avoid using harsh chemicals
and only use moderate water pressure (500–1000 psi).
Avoid direct pressure to the following components:
• Engine
• Hoses
• Labels
a
wc_gr003476
34
RS 800 /...