Permanent Primary Activation; Permanent Primary Deactivation; Legacy Mobexcom Ii Voting Compatibility Mode - Futurecom DVRS User Manual

8A083X30 Rev.11
APX Series P25 Interface
DVRS User's Guide

Permanent Primary Activation

If programmed, a DVRS can be forced to be a Permanent Primary from the MSU CH.
NOTE:
If another Permanent Primary is already present, the newly activated Permanent Primary
DVR will force the "old" Permanent Primary to assume Permanent Primary 'On Standby'
If the Permanent Primary leaves the scene, the Permanent Primary 'On
Status.
Standby' takes over. If several users try to simultaneously activate several DVRS as
Permanent Primaries, the DVRs will go through voting to ensure only one Permanent
Primary DVR is selected and all other DVRs are forced to become Permanent Primary
'On Standby'.

Permanent Primary Deactivation

The Permanent Primary status of a DVRS can be switched off from the MSU CH.

Legacy Mobexcom II Voting Compatibility Mode

The voting compatibility mode is applicable to analog DVRS mode only. If Legacy
Mobexcom II Voting Compatibility mode is enabled in the DVR, its voting algorithm is
compatible with older style analog only Mobexcom II VRs. Enabling this feature allows
seamless replacement of old style VRs with the new DVR by supporting the deployment
of both types of units in the same fleet during the transition period.
January 2019 Page 41 of 94