Table 10 Primary Dvr Definitions - Futurecom DVRS User Manual

•
Powering down a DVRS
•
Detected presence or absence of another Primary
•
User enforced Permanent Primary status
An active DVR which
has won the voting
selection and has
been selected to
repeat Local PSU or
System
communications.
DEFINITION
Transparent to the
user selection via
DVRS voting
algorithm.
SELECTION
DISPLAY
Steady

Table 10 Primary DVR Definitions

NOTE:
As an option, an external light may be placed on the top of the vehicle, which can be
used to indicate which DVRS is the currently selected Primary.
January 2019
PRIMARY
An active DVR which
was voted off and
forced to stay on
stand-by, without
repeating for as long
as the elected Primary
DVR is servicing the
communication needs
in the area.
Transparent to the
user selection via
DVRS voting
algorithm.
STANDBY
An active DVR, which
is forced by the user or
programmed to act as
a Primary. The
Permanent Primary
forces all other DVRs
in the area to assume
Secondary status. If
more than one
Permanent Primary is
available in the same
area, it will go through
higher level voting to
elect one winning
Permanent Primary.
Press the DVRS
button to enter the
'DVR Control Menu',
then press the PM
button to toggle
Permanent Primary
Status ON and OFF if
such selection is
enabled in the DVRS
personality.
Flashing
8A083X30 Rev.11
APX Series P25 Interface
DVRS User's Guide
PERMANENT
PRIMARY
Steady
Page 40 of 94