Hyundai N700E Instruction Manual page 80

N700E INSTRUCTION MANUAL N700E INSTRUCTION MANUAL N700E INSTRUCTION MANUAL N700E INSTRUCTION MANUAL
Auto-tuning method
Motor connection
Auto-tuning mode
selection H01=1
Run command ON
Motor parameter setting
Auto-tuning mode
selection H01=1
Note) The motor parameter of N700E is standard data of HYUNDAI standard 4-poles motor.
At the sensorless vector control when using different poles motor, operates by using auto-tuning
data as a motor parameter.
↓
↓
↓
↓
End display
Auto-tuning process completed :
Auto-tuning process failed :
① DC excitation(no rotation)
② Single phase excitation.
20