Contents
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CGM Software . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PLC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
system) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
System) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Related Manuals
Manual
Description
Communications Gateway Module,
312864
Instructions - Parts
Electric Fixed Ratio Proportioner, Setup -
3A6165
Operation
406987
GCA CAN Cables, Reference
Models
Part
Description
25B127
DeviceNet CGM Kit
26A700
EtherNet/IP CGM Kit
26A701
PROFIBUS CGM Kit
26A702
PROFINET CGM Kit
2
Overview
The Communications Gateway Module (CGM) provides
a control link between the Electric Fixed Ratio (EFR)
system and a selected fieldbus. This provides the
means for report monitoring and control by external
automation systems.
NOTE: The following system network configuration files
are available at
help.graco.com.
•
EDS file: DeviceNet or Ethernet/IP fieldbus
networks
•
GSD file: PROFIBUS fieldbus networks
•
GSDML: PROFINET fieldbus networks
•
ACD file: DeviceNet or Ethernet/IP fieldbus
networks
The following components are included in the CGM
Installation Kit.
Ref.
Description
A
CGM Kit
AA Gateway Module
AB Mounting Bracket
B
Screw, #10-32 x .50
C
Washer, #10, Nylon
D
Communication Cable (not shown)
C
B
AA
AB
F
. 1
IG
CGM Software
The following software is must be installed on the CGM
module to work properly with the EFR CGM map
19A796.
•
17P796, version 3.01.004
Qty.
1
1
1
2
2
1
3A6338B