Graco CGM 25B127 Instructions - Parts Manual page 7

EtherNet/IP Fieldbus Screens
These screens are shown only if an EtherNet/IP
Fieldbus CGM is installed.
Screen 1
This screen enables the user to set the IP address,
DHCP settings, subnet mask, gateway, and DNS
information.
F . 13: EitherNet/IP Fieldbus Screen 1
IG
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
F . 14: EtherNet/IP Fieldbus Screen 2
IG
3A6338B
DeviceNet Fieldbus Screen
This screen is shown only if a DeviceNet Fieldbus CGM
is installed.
This screen enables the user to set the device address
and baud rate, as well as view the hardware revision,
system serial number, and data map identification
information.
F . 15: DeviceNet Fieldbus Screen
IG
Setup
7