System Overview - Pyronix PCX 78 Installation Manual

System Overview

There are two control panels in the PCX hybrid range:
• PCX S approved to EN50131 Grade 2
• PCX L approved to EN50131 Grade 3
Both panels are suitable for small to medium commercial installations. These systems start with
8 wired inputs, and can be increased to a possible 78 using our wired and wireless expansion
modules.
Table 1 - Areas
Area
Independent areas
Sub areas
Table 2 - Inputs
Input
Wired inputs On-board
Wired inputs (max)
Wireless inputs (max)
Maximum inputs
Table 3 - PGM Outputs
Output
PCB
ATE outputs
Maximum PGM outputs
User automation outputs
PCX Installation Guide
PCX Additional Information
8
5 Each sub-area is created by a proximity reader
PCX Additional Information
8 Supports Double Pole (N/C), DEOL and 3EOL
78
64 2 x Wireless input expander: PCX-RIX32-WE
78 8 x Wired/wireless input expanders: PCX-RIX8,
PCXRIX8+, PCX-RIX8+PSU, PCX-RIX32-WE.
6 x Keypads/readers: PCX-LCD/EX, PCX-
PROX/EXT, PCXPROX/INT
PCX Additional Information
5 1 Relay, 4 transistor (Inputs 7 & 8 may be used as
outputs)
10 Low power ATE outputs
85 3 x Outputs on the PCB
2 x Shared outputs on the PCB: XPGM 1&2
(Inputs 7&8)
2 x Output expanders: PCX-ROX8R8T, PCX-
ROX16R+PSU
8 x Wired input expanders: PCX-RIX8+, PCX-
RIX8+PSU each have 4 outputs on board
6 x Keypads, or 1 x Keypad and 3 to 5 x Readers:
6 outputs
10 x ATE PGMs
30 Allows users to activate these outputs via
keypad (PCXLCD/ EX), smart device app, or
keyfob (KEYFOB-WE)
102017852 - V01 7