Power And Battery Connections For The Pcx S - Pyronix PCX 78 Installation Manual

No Item
16 RS232 connection
17 Communication outputs
18 Bell fuse
19 Auxiliary fuse
20 Bus fuse
21 Battery fuse
Power and Battery Connections for the PCX S
Panel power supply input
Mains Supply Voltage AC
Transformer Rating PCX L
Panel power supply output
Output voltage
Output Current PCX L
Power Supply Type A.
18 PCX Installation Guide
Description
This connection is used for an RS232 lead that will connect to a PC
to allow uploading and downloading of data using the InSite
software
Connects the ATE and its communication loom to enable an
additional 10 programmable outputs. These are low current and
would normally be used when connecting a stand-alone
communicator to the panel.
Nominal
230 Vac at 50 Hz
18 VA
Nominal
13.7 Vdc
1 A continuous
Range
-15% +10%
18.0 V at 1.0 A
Range
10 - 15 Vdc
1.5 A peak, during battery charging
102017852 - V01