Cables And Terminals - Leica DVM6 User Manual

Cables and Terminals

General Instructions
Please only connect the provided power
supply. Using an incorrect voltage can
substantially damage the Leica DVM6.
Leica DVM6 User Manual
Power supply and computer
1
2
4
1. Make sure that the Leica DVM6 is switched
off.
2. Connect the Leica DVM6 to a suitable
power socket using a power supply and
power cable.
3. Connect the Windows PC to the power
supply.
4. Using the USB cable, connect the
Leica DVM6 to the Windows PC.
Installation/Assembly
3
4
If you are not using an all-in-one
computer, connect the monitor and
computer to the power supply and connect
the monitor to the computer. Then connect the
Leica DVM6 to the computer via USB.
23