Advertisement
ASSEMBLY INSTRUCTIONS FOR
LEICA DVM6 INTERFACE MODULE
This guide does not replace the complete manual provided on the CD.
INCLUDED COMPONENTS:
1
6
3
5
2
10450707 interface module
to mount DVM6 to focus column
1
DVM6 focus column adapter
2
required to align DVM6 optical axis to Leica
TL5000 Ergo base
3
4x M3x8 screws
4
to connect the zoom module with
the interface module
5
4
1x M5x25 screw
6
to fix the interface module to the
focus column
USB cable
to connect interface module to PC
4x M5x20 screws
to mount the DVM6 focus
column adapter from underneath
to the standard adapter plate of
the TL5000 Ergo base
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Leica DVM6
Summary of Contents for Leica DVM6
- Page 1 This guide does not replace the complete manual provided on the CD. INCLUDED COMPONENTS: 10450707 interface module to mount DVM6 to focus column DVM6 focus column adapter required to align DVM6 optical axis to Leica TL5000 Ergo base USB cable to connect interface module to PC 4x M3x8 screws...
- Page 2 Remove objective Put stage in lowest position and turn off the microscope Access the 4 screws from below to open them Slightly pull out the zoom module and unplug the USB and control cable Mount zoom module on interface module repeating the procedure backwards: >...
Need help?
Do you have a question about the DVM6 and is the answer not in the manual?
Questions and answers