Installation / First Use; Unpacking The Device; Recommendations; Installation - Satelec IMPLANT CENTER 2 User Manual

Overall dimensions
Control unit:
Width: 472.9 mm
Height: 149.5 mm
Height with bracket: 471.1 mm
Depth: 339.9 mm
Weight: 5 kg without accessories
Footswitch:
Width: 311 mm
Depth: 209 mm
Height: 181 mm
Weight: approximately 3.5 kg
LCD screen:
Height: 86 mm
Width: 115 mm
Micro-motor cord: 2 000 mm (2 900 mm optional)
Scaler handpiece cord: 2 000 mm (2 900 mm
optional)
P handpiece cord: 2 000 mm (2 900 mm
IEZOTOME
optional)
I-S micro-motor:
URGE
Length: 99 mm
Diameter: 21 mm
Weight: 120 g
Coupling type: according to standard ISO 3964
Temperatures
Operation: +10°C to +40°C
Storage: -20°C to +70°C
Humidity
Operation: 30% to 75%
Storage: 10% to 100% including condensation
Atmospheric pressure
Between 500 hPa and 1060 hPa
Measuring units displayed and meaning
Ncm = torque (N.cm)
Rpm = speed (r/min.)
IV - INSTALLATION / FIRST
USE

4. 1 UNPACKING THE DEVICE

Upon receipt of the device, check for any damage
caused in transit.
Contact your supplier if necessary.

4. 2 RECOMMENDATIONS

Have your I
MPLANT
power electricity supply by a certified dental
installation technician.
The electrical connection of the I
must comply with the applicable standards in
your country.
Warning:
To avoid any risk of electric shock, this device
must be connected to an electrical power
supply with a protective ground.

4. 3 INSTALLATION

Important:
Do not place the I
MPLANT
top of another device.
Do not place the power cord and the footswitch
cord in a wire cover or in a cable gland.
- Place the control unit in position on a fixed
surface, horizontal or with a slope of no more
than 5°.
C 2 connected to the
ENTER
MPLANT
C 2 close to or on
ENTER
C 2
ENTER
11