Installation / First Use; Unpacking The Device; Recommendations; Installation - Satelec Implant Center 2 User Manual

Safety devices
Thermal safety shut off to avoid overheating of the I-
S L micro-motor
URGE ED
Safety shut off if internal malfunction
2 fuses (power cord receptacle): 5 mm x 20 mm - 2
AT for 100 VAC to 230 VAC
1 internal fuse not accessible to the user reference
F1: 5 mm x 20 mm – 10 AT / 250 VAC
Overall dimensions
Control unit:
Width: 472.9 mm
Height: 149.5 mm
Height with bracket: 471.1 mm
Depth: 339.9 mm
Weight: 5 kg without accessories
Footswitch:
Width: 311 mm
Depth: 209 mm
Height: 181 mm
Weight: approximately 3.5 kg
LCD screen:
Height: 86 mm
Width: 115 mm
Micro-motor cord: 2 000 mm
Scaler handpiece cord: 2 000 mm
P handpiece cord: 2 000 mm
IEZOTOME
I-S L micro-motor:
URGE ED
Length: 93.1mm
Diameter: 23.2mm
Weight: 119g (without cord)
Coupling type: according to standard ISO 3964
Temperatures
Operation: +10°C to +40°C
Storage: -20°C to +70°C
Humidity
Operation: 30% to 75%
Storage: 10% to 100% including condensation
10
Atmospheric pressure
Between 500 hPa and 1060 hPa
Measuring units displayed and meaning
Ncm = torque (N.cm)
Rpm = speed (r/min.)
IV - INSTALLATION / FIRST
USE

4. 1 UNPACKING THE DEVICE

Upon receipt of the device, check for any damage
caused in transit.
Contact your supplier if necessary.

4. 2 RECOMMENDATIONS

Have your I C
MPLANT ENTER
electricity supply by a certified dental installation
technician.
The electrical connection of the I
comply with the applicable standards in your country.
Warning:
To avoid any risk of electric shock, this device must
be connected to an electrical power supply with a
protective ground.

4. 3 INSTALLATION

Important:
Do not place the I
MPLANT
of another device.
Do not place the power cord and the footswitch
cord in a wire cover or in a cable gland.
- Place the control unit in position on a fixed surface,
horizontal or with a slope of no more than 5°.
- Check that the power switch (Fig. 2-5) is in position
O (OFF).
2 connected to the power
C 2 must
MPLANT ENTER
C 2 close to or on top
ENTER