Table of Contents
Advertisement
CLEANING OF THE RECOVERY TANK
1. Empty the tank through the flexible hose, unscrewing of some turns the knob and then taking off
the plug
2. Open the side plug by unscrewing the knob and rotating the closing blade
To perform this operation wear the protection gloves to prefent contacts with
dangerous liquid
3. Open the hooks for the tank fastening (3)
4. Pull carefully the tank in the rear side until the chain is tensioned (4)
5. Open the hooks that fasten the suction head (5)
6. Open the lid rotating it until it lead to the tank (6)
7. Rinse the tank and clean the exhaust plug
8. Retighten the side plug and the plug onto the exhaust pipe
9. To close the suction head and the tank, perform the reverse operations
CLEANING OF THE RECOVERY TANK FILTER
1. Open the recovery tank cover
2. Clean the tank with a water jet
3. Extract the filter of the float switch fixed inside the tank
4. Wash it thoroughly and put it again into its position
DAILY MAINTENANCE
20
1
2
3
4
5
6
1
2
Hide quick links:
Advertisement
Table of Contents
