Set Communications Options; Network (Ethernet) - ZKTeco F18 Quick Start Manual

selection. The F18 will prompt you "OKDel"? Press the OK again to confirm deletion.

Set Communications Options:

The F18 can communicate via the Network (Ethernet), RS/232 or RS485.

Network (Ethernet)

Press the Menu key to open the Main menu;
From the Main Menu, highlight and select Comm. to configure Communication Settings.
Then press the OK Key to accept
From within the Comm Menu, scroll with the ◄/► keys until Network is highlighted. Press
the OK key to accept.
Notice the following "Network" settings are available