Extron electronics PowerCage 1600 User Manual page 21

N15778
I.T.E.
1T23
100-240V 50/60Hz
5A MAX.
Rear Panel
Appropriate LED Lights
1 2 3 4 5
COMM
POWER
ALARM
Front Panel
Figure 9. Changing Serial Connections From One Board to the Next
NOTES:
• The Comm LED lights for each installed, powered board as its slot is selected,
regardless of the type of board. For a double-slot board, only the LED for the
lower-numbered slot lights.
•
The serial connection remains with the last-selected board while the unit is
on. When unit power is cycled (removed then restored), the serial connection
returns to the board in the lowest-numbered slot.
4. Use a terminal emulation program such as Telnet or Extron DataViewer to send Simple
Instruction Set (SIS) commands and queries to the selected board. For model-specific
commands and adjustments, refer to the user guide for each model of board that is
installed in the PowerCage Enclosure.
PowerCage
PowerCage
FOX Tx AV FOX Rx DVI
PowerCage PowerCage
MTP T AV
MTP R AV
16 15 14 13 12 11 10 9
Jumps to Populated Board Number
6 7 8 9 10 11 12 13 14 15 16
PSU PSU
1 2
PowerCage 1600 Enclosure • Operation
PowerCage PowerCage
FOX Tx DVI FOX 3G HD-SDI
PowerCage PowerCage
MTP R
MTP T
15HD RSA SEQ 15HD RSA
8 7 6 5 4 3 2 1 Slot Number
FAN FAN
COMM
1 2
SELECT
TEMP
CONFIG
PowerCage 1600
15