Ruijie RG-S29 Series Command Reference Manual page 389

Command Reference
N/A
Defaults This function is disabled by default.
Command Global configuration mode
mode
Usage Guide This command is used to display the configuration.
Configuration The following example enables the GVRP function.
Ruijie(config)#gvrp enable
Examples
Related
Command
Commands
show gvrp configuration
N/A
Platform
Description
10.6 gvrp registration mode
Use this command to set the registration mode to control whether to enable dynamic VLAN
creation/registration/canceling on the port. Use the no form of this command to restore the default
setting.
gvrp registration mode { normal | disabled }
no gvrp registration mode
Parameter
Parameter
Description
normal
disabled
Defaults Dynamic VLAN creation/registration/canceling is enabled by default,
Interface configuration mode.
Command
mode
N/A
Usage Guide
Configuration The following example sets the registration mode.
Ruijie(config-if)# gvrp registration mode normal
Examples
Related Command
N/A
Description
Displays the GVRP configurations.
Description
Enables dynamic VLAN creation/registration/canceling on the port.
Disables dynamic VLAN creation/registration/canceling on the port.
Description
GVRP Commands