Ruijie RG-S29 Series Command Reference Manual page 375

Command Reference
Defaults The default is mstp.
Command
Mode Global configuration mode.
Usage Guide However, some vendors' devices do not work according to 802.1 protocol standards, possibly
causing incompatibility. If other vendors' devices are incompatible with Ruijie devices, run this
command to switch the STP mode to a lower version.
Configuration The following example sets the STP version.
Ruijie(config)# spanning-tree mode stp
Examples
Related
Command
Commands
show spanning-tree
Platform N/A
Description
9.30 spanning-tree mst configuration
Use this command to enter the MST configuration mode in the global configuration mode and
configure the MSTP region. Use the no form of the command to restore the default setting.
spanning-tree mst configuration
no spanning-tree mst configuration
Parameter
Parameter
Description
N/A
Defaults
Command Global configuration mode.
Mode
Usage Guide To return to the privileged EXEC mode, enter end or Ctrl+C.
To return to the global configuration mode, enter exit.
After entering the MST configuration mode, you can configure MSTP Region parameters:
This example enters the MST configuration mode.
Configuration
Ruijie(config)# spanning-tree mst configuration
Examples
Ruijie(config-mst)# instance 1 vlan 3, 5-10
Description
Displays the spanning-tree configuration.
Description
N/A
MSTP Commands