Table of Contents
Advertisement
TSP01
™
The NI-VISA
engine can be installed from the following sources:
· The software CD shipped with previous-revision TSP01 sensors (not labeled RevB). The in-
staller includes NI-VISA™.
· The National Instruments' website
www.ni.com
2.3
Software Installation
Please download the TSP01 Application from the software tab on the TSP01 website.
Attention
Do not connect the TSP01 to the PC during software installation! Please make sure that the in-
stallation is carried out completely, including the reboot requests.
· Save the ZIP file to your computer and unpack the archive.
· Double click the setup.exe to install Shield Wizard.
· Read and accept the End-user License Agreement.
· Note the Readme Information during the installation process:
"V 2.0: - Temperature sensor TSP01 RevB supported (includes a new library TLTSPB)
- NIVISA Runtime removed from installer. "
NI-VISA™ has been removed from the installer since it is not required for TSP01 sensors
labeled "RevB". TSP01 sensors without the RevB label will require the installation of NI-VISA™
software.
6
© 2018 Thorlabs
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TSP01 and is the answer not in the manual?
Questions and answers