Special Conversions; Special Vehicle Options (Svo) Harnesses And Aftermarket Kits; Additional Vehicle Signals/Features - Ford TRANSIT 2016.75 Mounting Manual

4.18 Special Conversions

4.18.1 Special Vehicle Options (SVO)
Harnesses and Aftermarket Kits
WARNING: Only Ford release wiring
should be used to support added vehicle
functionality. If the implementation of
wiring other than this is required, Ford
guidelines must be followed.
Special Vehicle Option Harnesses and Aftermarket Kits
Part Number
GK2V-14517-A*
GK3V-14517-C*
KTBK2V-14A411-A*
KTBK2V-14A411-B*
KTGK2V-14A411-C*
KTBK2V-14A411-D*
KTBK2V-14A411-F*
KTBK2V-14A411-G*
BK3V-10A933-B*
GK3V-14659-B*
GK3V-14659-C*
GK3V-14659-D*
GK3V-14659-E*
GK3V-14649-N*
GK3V-14649-P*
GK2T-13B576-A*
BK3T-13B576-E*
BK3T-13B576-F*
BK3T-13B576-G*
GK2T-19H378-A*
GK3T-14406-**
GK3T-14401-**
^
Refer to: 4.1 Wiring Installation and Routing Guides (page 85).
Figure E185972 Trailer Tow Module Connectors
4.18.2 Additional Vehicle
Signals/Features
WARNING: When interfacing with
specific lighting high side driver outputs,
additional supplemental signal access,
relays and peripherals fitted, must be
compatible with a Pulse Width
Modulation (PWM) frequency of 200Hz.
EU FORD TRANSIT 2016.75
Auxiliary Fuse Panel Harness LHD
Auxiliary Fuse Panel Harness RHD
C1 Connector Jumper Harness (for Auxiliary Fuse Panel)
C2 Switch Connector Jumper Harness (for Auxiliary Fuse Panel)
Vehicle Interface Connector
High Specification Vehicle Interface Connector Jumper Harness
Utility Pack Connector Jumper Harness
Beacon Connector Jumper Harness
Beacon Preparation Pack Jumper Harness
Beacon Preparation Pack LHD
Beacon Preparation Pack RHD
Utility Vehicle Switch Pack LHD
Utility Vehicle Switch Pack RHD
Beacon Preparation Pack LHD (Chassis Cab or Front Beacon Only)
Beacon Preparation Pack RHD (Chassis Cab or Front Beacon Only)
Trailer Tow Jumper Harness (Connector A)^
Trailer Tow Socket Jumper FWD
Trailer Tow Socket Jumper RWD - Van, Kombi and Bus
Trailer Tow Socket Jumper - Chassis Cabs only
Trailer Tow Module
Fuel Tank Harness
Main Harness (Connectors B & C)^
NOTE: The Auxiliary Fuse Panel (A526) should
be ordered
Refer to: 4.17 Fuses and Relays (page 185).
Refer to: 4.20 Grounding (page 219).
In addition to the Auxiliary Fuse Panel, a number
of other kits are available to meet customer
needs, see the 'Special Vehicle Option Harnesses
and Aftermarket Kits' table.
Description
For list of lighting circuits that are PWM supplied:
Refer to: 4.2 Communications Network (page 98).
BCM Output Information table.
For additional information on lighting loads
Refer to: 4.12 Exterior Lighting (page 169).
Date of Publication: 03/2018
189