Adding Connectors - Ford TRANSIT 2016.75 Mounting Manual

Body and equipment mounting
Table of Contents

Advertisement

4.19.11 Adding Connectors

Additional 'Theater Lighting' for rear of
vehicle interior
1
4
E146835
Item
Pin 1
Supply through Battery Saver
Pin 5
Ground - Dimming
Marker Lights
1
19
27
29
32
40
42
E147188
Item
Pin 14
Side Marker Supply - Yellow/Violet
WARNING: The Position and Marker
Lights of the vehicle are collectively
powered via F15 in the Body Control
Module at a rating of 25A. A nominal
current rating of 20A (full load including
all potentially fitted additional lights)
must not be exceeded.
Additional Rear Speakers
NOTE: The connectors on the Instrument Panel
harness (14K024) and the main harness (14401)
are reversed between Left Hand Drive (LHD) and
Right Hand Drive (RHD) vehicles, hence different
sets of terminals/wires are required to cover all
the markets.
For information on rear speakers:
Refer to: 4.10 (page 162).
218
Date of Publication: 03/2018
3
6
Description
14
18
Description
Unused Connectors
The harnesses may have a number of unused
connectors – these are dedicated to other features
and options, e.g. heated seats, but are not always
present depending on level of harness fitted. Ford
do not recommend the use of these connectors
for any other purpose than that intended by design.
Power Inverter / Cigar Lighter
Both features adopt a 20A fusing strategy. With a
single battery system, continued loading of these
features will lead to battery drain, and risk vehicle
starting. If continuous power is required, a second
battery option should be installed and the
customer connection points, where fitted, utilized.
At engine OFF, all three power outlets are
connected to the battery saver system, where the
supply will switch off at 30 minutes. Battery saver
can be ordered or reconfigured to a longer duration
of 180 minutes.
26
28
31
39
41
59
FORD TRANSIT 2016.75
EU

Advertisement

Table of Contents
loading

Table of Contents