Jacking; Front Jacking Points - Ford TRANSIT 2016.75 Mounting Manual

1.10 Jacking

WARNINGS:
Always position the vehicle on a hard
level surface. If the vehicle must be
jacked up on a soft surface use load
spreading blocks under the jack. Always
chock the wheel diagonally opposite the
jacking point. Failure to follow these
instructions may result in personal injury.
You must use the specific jacking points.
CAUTION: Make sure that access to the
spare wheel is maintained when
converting the vehicle or relocating the
spare wheel.
NOTE: When using the vehicle jack, refer to the
owner guide for correct operating instructions.
NOTE: Make sure that reinforcements are
installed to maintain the integrity of the original
body structure for/at jacking points.
NOTE: Any modifications to the vehicle must be
noted in the owner's handbook or new descriptive
literature included with the owner's
documentation.

1.10.1 Front Jacking Points

NOTE: If your vehicle has rear air conditioning
make sure the vehicle jack does not come in
contact with the air conditioning lines.
Rear Wheel Drive Vehicles T410 and Over
Position the head of the vehicle jack under the
protrusions at the rear of front sub-frame.
EU FORD TRANSIT 2016.75
Front Wheel Drive vehicles and Rear
Wheel Drive Vehicles up to T370
Position the head of the vehicle jack under the
front sub-frame rear mounting bolts.
E171405
E170180
Date of Publication: 03/2018
25