Cisco NCS 4000 Series Troubleshooting Manual page 31

Hide thumbs Also See for NCS 4000 Series:

Table of Contents

Alarm Management

If the condition does not clear, log into the Technical Support Website at

index.html

ODUk-SD-PM

Default Severity: Not Alarmed (NA), Service-Affecting (SA)

Logical Object: PORT

ODUk-SD-PM (Signal Degrade) alarm occurs when the quality of signal is so poor that the Bit Error Rate

(BER) on the incoming optical line passed the signal degrade threshold.

Clear the ODUk SD PM Alarm

Procedure

Check if the cable is connected properly. Bent or damaged cables lead to signal loss. Replace the cable, if

necessary.

If the condition does not clear, log into the Technical Support Website at

index.html

ODUk-SF-PM

Default Severity: Not Alarmed (NA), Service-Affecting (SA)

Logical Object: PORT

Hardware and software both can generate ODUk-SF-PM alarm based on the summarization of TIM, LCK,

and AIS alarms.

Clear the ODUk SF PM Alarm

Procedure

ODUk SF alarm gets cleared when none of the defects, TIM, LCK or AIS exist.

If the condition does not clear, log into the Technical Support Website at

index.html

ODUk-TIM-PM

Default Severity: Major (MJ), Service-Affecting (SA)

for more information or call Cisco TAC (1 800 553-2447).

http://www.cisco.com/c/en/us/support/

Alarms Troubleshooting Guide for Cisco NCS 4000 Series

ODUk-SD-PM

Table of Contents