Cisco NCS 4000 Series Troubleshooting Manual page 24

IMPROPRMVL
If the condition does not clear, log into the Technical Support Website at
support/index.html
IMPROPRMVL
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Object: PORT
The Improper Removal alarm occurs when the card or pluggable is physically removed or reloaded.
Clear the Improper Removal Alarm
Procedure
Plug in the card or pluggable.
If the condition does not clear, log into the Technical Support Website
support/index.html
INSTALL-IN-PROGRESS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (SA)
Logical Object: SYSADMIN
The Install In Progress alarm is raised when software upgrade starts or when sysadmin ISSU starts.
Clear the INSTALL_IN_PROGRESS Alarm
Procedure
This alarm is automatically cleared by the system once the system upgrade is complete; time taken for the
upgrade is typically between 30 seconds to 3 minutes.
Human intervention is not required for clearing this alarm. Incase, the alarm is displayed for a long duration,
it is recommended to reconfigure the port.
If the condition does not clear, log into the Technical Support Website
support/index.html
ISSU-IN-PROGRESS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Alarms Troubleshooting Guide for Cisco NCS 4000 Series
10
for more information or call Cisco TAC (1 800 553-2447).
for more information or call Cisco TAC (1 800 553-2447).
for more information or call Cisco TAC (1 800 553-2447).
Alarm Management
http://www.cisco.com/cisco/web/
athttp://www.cisco.com/cisco/web/
athttp://www.cisco.com/cisco/web/