Table of Contents
Advertisement
SPA-ZC 302
5.4.8.
5.4.8.1.
42
Profibus-DPV1/SPA Gateway
Installation and Commissioning Manual
Template info
The Template info is shown on the right column of the main window. To open a
template into the Template info field, select File > Open in the main menu, or click
the corresponding icon in the toolbar. The template signal list shows all the signals
that exist in the current configuration, see Fig. 5.3.-1, number 6. Use the scroll bar
on the right to navigate downwards in the signal list.
The signal types of the SPA slave devices that will be used by the gateway are
presented in square brackets in the Template info field. The signal types are the
following:
• Analog Input
• Digital Input
• Analog Output
• Digital Output
• Indirect SPA Messages
The description of the signals and their settings are presented in columns in the
Template info field.
Each SPA slaves' data is shown on their own tabbed pages. The total template size
is shown above the tabbed pages. The maximum size is 240 input bytes or output
bytes.
To configure the settings, select a signal and click Edit, or double-click on the
signal. A dialog with configuration options will pop up. For details, see the sections
below. The templates and configuration of the signals will also be described in the
following sections.
Analog input
When you have opened a template with an analog input into the main window, you
can configure the settings that are shown in the Template info field as follows:
1. Select the signal you want to configure and click Edit, or double-click on the
signal.
2. A dialog is opened where you can modify the settings of that specific signal, see
Fig. 5.4.8.1.-1. The fields that you cannot configure are dimmed.
3. To save the new settings, click OK. To cancel, click Cancel to discard all the
changes.
1MRS755014
Advertisement
Table of Contents
