Led Indicators - Planet Networking & Communication BSP-360 Quick Installation Manual

3.2 LED Indicators

 System
LED Color
PWR Green
Fault Green
PV
Green
System
50W Green
100W Green
120W Green
 PoE 10/100/1000BASE-T Interfaces (Port-1 to Port-4)
LED Color
LNK/
Green
ACT
PoE Orange
 10/100/1000BASE-T Interfaces (Port-5)
LED Color
LNK/
Green
ACT
On To indicate BSP-360 has power.
Slow
To indicate the PV is disconnected.
Blinks
Fast To indicate the battery voltage is less than the
Blinks value for low voltage disconnection.
To indicate bad battery, over-current or
On
short-circuit.
Slow
To indicate the system is "on".
Blinks
Fast
To indicate the battery is "charging".
Blinks
To indicate the system consumes over 50-watt
On
PoE power budget.
To indicate the system consumes over 100-watt
On
PoE power budget.
To indicate the system consumes the total
On
120-watt PoE power budget.
To indicate the link through that port is
Blinks
successfully established.
Lights To indicate the port is providing DC in-line power.
To indicate the connected device is not a PoE
Off
Powered Device (PD).
To indicate the link through that port is
Blinks
successfully established.
Function
Function
Function
7