Table of Contents
Advertisement
5. Web Management
The following shows how to start up the Web Management of the BSP-360. Note
the BSP-360 is configured through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
For example, the default IP address of the BSP-360 is 192.168.0.100, then the
manager PC should be set to 192.168.0.x (where x is a number between 1 and
254, except 100), and the default subnet mask is 255.255.255.0.
BSP-360
Logging in to the BSP-360
Step 1. Use Internet Explorer 8.0 or above for Web browser and enter IP address
http://192.168.0.100 (the factory-default IP address) to access the
Web interface.
Step 2. When the following dialog box appears, please enter the default user
name "admin" and password "admin" (or the password you have
changed before).
Default IP Address: 192.168.0.100
Default User Name: admin
Default Password: admin
16
Ethernet Switch
Monitoring Center
Advertisement
Table of Contents
