Hardware Installation - Planet Networking & Communication BSP-360 Quick Installation Manual

4. Hardware Installation

The following section describes the hardware installation of the BSP-360. Before
connecting any network device to the BSP-360, read this chapter carefully.
CAM1 CAM2
PoE
PoE
N
Wireless CPE/AP
Media Converter/
DC Powered Device
Please follow the following steps to install the system:
Step 1. Install BSP-360
Place the BSP-360 in a desired location using the wall-mount fixtures.
a. Please install the BSP-360 in a proper enclosure or shelter.
b. The BSP-360 must be grounded.
Note
10
CAM3
PoE PoE
DC
Ethernet Switch
Turbine
DC
DC
Battery
BSP-360
Monitoring Center
Power Line (DC)
DC
1000BASE-T UTP
1000BASE-T UTP with PoE
PoE
2.4GHz 802.11n
N
Solar PV