Planet Networking & Communication BSP-360 Quick Installation Manual page 14

Industrial renewable energy, industrial solar power 5-port gigabit managed switch with 4-port 802.3at poe plus

Hide thumbs Also See for BSP-360:

Table of Contents

Step 4. Connect 802.3af/802.3at PoE Device

802.3af/at PoE Device

1. Connect the PoE devices to ports 1~4 on the BSP-360.

2. Check the PoE-in-Use LED. If the network devices such as PoE camera and PoE

wireless AP are powered, the PoE-in-use LED will turn ON and Link/Act LED

will blink for a successful connection or data receiving.

 Please use Cat5/5e or above cable and the maximum distance

should within 100 meters.

 If the Network devices are installed outdoors, please consider to

install a lightening arrestor to protect the network device and the

Note

BSP-360.

PoE

Table of Contents