Spanning Tree Protocol Menu
Use the STP menu to configure the Spanning Tree Protocol. STP detects
and disables network loops and provides backup links between switches,
bridges, and routers to ensure that only one route exists between any two
stations on the network. The backup links automatically take over when a
primary link goes down.
Menu
STP Enable/Disable
System Configuration
Perport Configuration
P
ROTOCOL
TigerSwitch 10/100 :
=====================
STP Enable/Disable
System Configuration
Perport Configuration
Previous Menu
Enabled or disabled the Spanning Tree Protocol.
Arrow/TAB/BKSPC = Move Item
Description
Enables/disables Spanning Tree Protocol
Configures global bridge parameters for STP
Configures port-specific parameters for STP
R
C
ELATED
ONFIGURATION
Spanning Tree Protocol
Enter=Select Item
M
ENU
Page
4-36
4-38
4-40
4-35