Cook To Order Mode - Taylor C801 Operating Instructions Manual

Cook Cycle Interrupted
Step 1
If the cook cycle is interrupted, the product that was
cooking must be discarded. The platen display will
turn red and an alarm will sound.
Step 2
The display reads
close.
Step 3
To deactivate the alarm, touch and hold the red
button for approximately one second, until the
display clears.
Figure 40
Step 4
Remove the meat from the grill and discard.
CAUTION: DO NOT use this meat for chili
meat as it cannot be assured that it has been
properly cooked.
C801/C801R/F802/P802/C803/C803R/C804
and the platen will not

Cook to Order Mode

Step 1
During operating hours, water clean the cook side
grill surface as needed, using standard Wendy's
procedures.
Step 2
A "Cook to Order" mode is provided for times when
it is desirable to shut down the staging side. Follow
Wendy's operating procedures when using this
function.
Step 3
The grill may be placed in the "Cook to Order" mode
by touching and holding the "COOK ONLY" button.
Amber lights will illuminate around the button.
Step 4
Before the "Cook to Order" mode can be entered, all
timing functions must be cleared on the staging side,
and the staging side must be emptied.
33
Figure 41
Operating Procedures